Researchers evaluate how fences can spread fires and ignite structures

Three weeks ago a television station in Dallas, FOX 4, streamed live video as a grass fire spread across a field and reached densely-packed houses, eventually destroying 9 and damaging another 17. There were several reasons why the structures were so vulnerable, including medium-heavy vegetation in the field adjacent to the property lines, very little impact from efforts of the fire department to stop the spread, no air support, and wood fences that connected all of the properties on the rear and sides of the homes.

On August 10 the National Institute of Standards and Technology (NIST) published results of 187 experiments that examined how fire spread toward a structure is affected by combustible fences and mulch under conditions that may be encountered in a wildland-urban interface (WUI) fire. They looked at mulch only, fence only, fence plus mulch, parallel fences, and long range firebrands. The materials studied were western red cedar, California redwood, pine, vinyl, and wood-plastic composites. Fence styles included privacy, lattice, and good neighbor (board on board).

A small structure was located between zero and up to six feet downwind of the fence or mulch bed as a target for flames and firebrands. A target mulch bed at the base of the structure tested the ability of firebrands produced by the burning fence and mulch bed to ignite spot fires that threatened the structure.

While not many homeowners place store-bought mulch below their fences, it can be common for debris to build up along the base on one or both sides. The amount and flammability can be extremely variable, but the researchers’ use of mulch gave them control over the flammable material which could be consistently duplicated in their experiments.

The study found that firebrands capable of igniting spot fires downwind were generated by nearly all combinations of fence and mulch tested in this study. All wood fences with mulch at the base caused spot fires in the target mulch bed. Spot fires were often ignited within a few minutes of mulch and fence ignition. Shredded hardwood mulch and pine bark mulch burned and emitted firebrands for longer than an hour. Ignition of spot fires was also demonstrated from firebrands transported by the wind over distances as far as 156 feet from the burning item under high wind conditions and over a paved surface.

The research generated a number of recommendations:

The video from the July 25 fire in Texas does not clearly show the fences between the residences, but it is likely that they directly connected to the structures. An example is seen in the photo below of two homes in Superior, Colorado, one of the communities devastated by the Marshall Fire that destroyed 991 structures south of Boulder December 30, 2021.

The images below are from the FOX 4 Dallas-Fort Worth video shot July 25, 2022.

Most structures that burn in a wildfire are not ignited by direct flame impingement, but by burning embers that are lofted and carried downwind ahead of the fire. At Wildfire Today we first covered the role of embers in igniting structures in 2010, a concept brought into the public consciousness by Jack Cohen, a researcher at the Missoula Fire Science Lab. To reduce the chances of a home burning in a wildfire, the most bang for the buck is to concentrate on the Home Ignition Zone. The flammable material near the structure needs to be modified, reduced, or eliminated to the point where multiple burning embers landing in the zone will not propagate the fire and spread to the structure.

More information: Six things that need to be done to protect fire-prone communities

Thanks and a tip of the hat go out to Gerald.

Typos, let us know HERE, and specify which article. Please keep in mind our commenting ground rules before you post a comment.

After working full time in wildland fire for 33 years, he continues to learn, and strives to be a Student of Fire. View all posts by Bill Gabbert